- Joined
- Dec 23, 2022
- Messages
- 682
- Reaction score
- 0
[member=47]eti[/member] replacing the old wallet files with the new ones is super easy:
1) open your masternode vps > go to the folder where the wallet .dat and .conf files are
2) enter the admin mode:
3) download the bootstrap file in the main folder where your wallet files are
4) delete following folders:
5) unzip the bootstrap
note: if the zip isn't installed:
6) Maria.conf file >> there is no need to edit anything. The only thing, you can add 2 more addnodes:
7) Go to another folder where the maria-cli is located at > usually usr/local/bin/:
8) Check the contents of it:
9) You should see 3 executable maria files (executable = in green colour). These are old files and need to be removed:
10) Download the newest wallet version (in this case 5.5.0):
11) unzip:
# Note: if zip doesn't work, install it with this command:
# if you had to install zip > re-run the line above (#11)
12) make the new maria files executable:
# and, double-check that new files are here:
==
this is it
Start your Maria wallet on your VPS
==
You can check if the MN wallet is on the current chain and block, by going to your folder where the maria.conf is at, and running:
verify that the latest block matches the latest block number on the explorer.mariacoin.com
************************************
did this help?
Best wishes!
Helmuts
1) open your masternode vps > go to the folder where the wallet .dat and .conf files are
2) enter the admin mode:
Code:
sudo su3) download the bootstrap file in the main folder where your wallet files are
Code:
wget https://bootstrap.mariacoin.com/boot_strap.zip4) delete following folders:
Code:
rm -rf *.dat blocks database chainstate evodb sporks zerocoin5) unzip the bootstrap
Code:
unzip boot_strap.zipnote: if the zip isn't installed:
Code:
apt install zip6) Maria.conf file >> there is no need to edit anything. The only thing, you can add 2 more addnodes:
Code:
addnode=188.40.233.45
addnode=94.130.95.1067) Go to another folder where the maria-cli is located at > usually usr/local/bin/:
Code:
cd /usr/local/bin8) Check the contents of it:
Code:
ls -al9) You should see 3 executable maria files (executable = in green colour). These are old files and need to be removed:
Code:
rm mar*10) Download the newest wallet version (in this case 5.5.0):
Code:
wget https://github.com/hostmaria/mariacoin/releases/download/v5.5.0/maria-5.5.0-ubuntu18-daemon.zip11) unzip:
Code:
unzip maria-5.5.0-ubuntu18-daemon.zip && chmod +x maria-cli mariad maria-tx# Note: if zip doesn't work, install it with this command:
Code:
apt install zip# if you had to install zip > re-run the line above (#11)
12) make the new maria files executable:
Code:
chmod +x maria-cli mariad maria-tx# and, double-check that new files are here:
Code:
ls -al==
this is it
Start your Maria wallet on your VPS ==
You can check if the MN wallet is on the current chain and block, by going to your folder where the maria.conf is at, and running:
Code:
tail -f debug.logverify that the latest block matches the latest block number on the explorer.mariacoin.com
************************************
did this help?
Best wishes!
Helmuts
